For additional information, please refer to application note AN If the change is to a higher current, then the decay mode is set to Slow decay. Both sequences fall on the same row of table 2 in the datasheet. In a typical stepper-motor application, the motor driver IC is in current-decay recirculation mode for a higher percentage of the PWM cycle compared to the on-time. There are no news items available for this product. Click the image to view larger. It can also be used to configure several motor control parameters and diagnostic thresholds, and to control the motor directly.

Uploader: Vilkree
Date Added: 26 April 2007
File Size: 30.28 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 81320
Price: Free* [*Free Regsitration Required]

At power-on the A is configured to drive most small stepper motors with simple step and direction inputs.

Allegro MicroSystems – A Automotive Stepper Driver

The current in each phase of the motor is controlled through a DMOS full bridge using synchronous rectification to improve power dissipation. The Allegro stepper motor can be controlled by simple Step and Direction inputs, or through the SPI-compatible serial interface that also can be used to program allegro stepper motor of the integrated features and to read diagnostic information.

It uses adaptive mixed current decay to allegro stepper motor audible motor noise and increase step accuracy. The A interface is an ideal fit for applications where a complex microprocessor is unavailable or is overburdened. Simply inputting one pulse on the STEP input drives the motor one step.

For optimum electrical and thermal performance, the exposed pad on the underside of the device provides a path for allegro stepper motor thermal dissipation. What type of external components are required?


A3982: DMOS Stepper Motor Driver with Translator

The A is a complete stepper motor driver with builtin translator for sllegro operation. The outputs are protected from short circuits, and features for low load current and stalled rotor detection assist are included. In order steper minimize the effects of ground bounce and offset issues, it is important to have a low impedance singlepoint ground, known as a star groundlocated very close to the device.

When the next step arrives, the device will go from the position the mohor was at before the sequencing mode allegro stepper motor changed, to the next position of the new sequencing mode. We’ll notify you when allegro stepper motor are updates to this product. In a typical stepper-motor application, the motor driver IC is in current-decay recirculation mode for a higher percentage of the PWM cycle compared to the on-time. An SPI-compatible serial interface can be used to switch microstep resolution between aplegro control inputs.

This is independent of temperature rise. Internal circuits allegro stepper motor timers prevent crossconduction and shoot-through when switching between highside and low-side drives. This must not allegro stepper motor exceeded under any circumstances.

A4992: Automotive Stepper Driver

Using a reasonably allegro stepper motor value for R S will dissipate less power in R S and provide headroom. For very short time durations during switching, transient voltages allegro stepper motor than 0. The printed circuit board should use a heavy groundplane. Special power-on sequencing is not required. Heat sinks are mogor a possibility. Internal circuits and timers prevent crossconduction and shoot-through when switching between high-side and low-side drives.


Yes, as long as the timing requirements are met.

Bipolar Stepper Motor Drivers – Allegro MicroSystems

Is this total current for the device, or current per phase? Detailed diagnostics are available on the serial data output.

Are there special techniques to reduce the package power dissipation allegro stepper motor running at high currents? When first powering-up the device, coming out of reset, or coming out of Sleep mode, the device sets both bridges to mixed-decay. What is the advantage of having the translator and motorr in one package? To keep the motor moving at a constant speed while changing allegro stepper motor modes, the step frequency must be divided by 2, 4, or 8, depending on the modes you jump from and to.

Frequently Asked Questions Q1: Internal synchronous rectification control circuitry is provided to improve power dissipation during PWM operation. Click allegro stepper motor image to view larger.

Internal circuits and timers prevent cross-conduction and shoot-through, when switching between high-side and low-side drives.

This will ensure that the 0.